▶️Produsul Coala CoversafeTM este certificat impotriva SARS-CoV-2. Solicita informatii

About Us

Drupa

Drupa 2016 trenduri internationale

Ramai conectat cu Antalis!

Tehnologia Inkjet reprezinta clar tehnologia viitorului cu o calitate crescuta si o multitudine de aplicatii. Au existat 3 stadii de dezvoltare a tehnolohiei Inkjet: Xerox® Brenva™ HD, Océ VarioPrint i300 si Fujifilm Jet Press 720 au fost realizate pentru un volum mai mare al aplicatiilor decat echipamentele cu toner pentru acelasi format. Din punctul de vedere al electrografiei infrumusetarea digitala se face peste tot cu folie sau lacuire, cu solutii online si offline pentru a adauga mai multa valoare documentelor printate. Si bineinteles Benny Landa care a captat multimile!



Hp Indigo

HP a lansat cateva updateuri ale sistemelor HP Indigo precum si cateva modele noi dedicate pietei de tiparituri comerciale dar si pietei de ambalaje si etichete.


Tiparituri Comerciale

 

Hp Indigo 5900

HP Indigo 5900

Ultimele 2 serii ale echipamentelor (HP Indigo 5900) includ modulul cu cerneluri de impact (cerneala alba, roz fluorescent si cerneala transparenta) si un primer ElectroInk ce permit materialelor sintetice si extrem de subtiri pana la 550 microni sa fie printate. Tehnologia One Shot (toate culorile all transferate pe substrat la o singura trecere) de asemenea pretabile pentru canvas, sintetice, lenticulare dar si mubstraturi metalizate.

Poate imprima pana la 68 A4 pagini (4 culori) pe minut.


 

HP Indigo 7900
HP Indigo 7900

Ultima seriie (HP Indigo 7900), precum 5900, include cerneluri cu impact crescut, cu modulul de primer ElectroInk si tehnologia One Shot. Poate imprima pana  la 120 pagini A4 (4 culori) pe minut.
 

HP Indigo 1200
HP Indigo 12000

 

HP Indigo 12000 – B2) poate imprima  4600 de formate B2/per ora; include modulul ElectroInk si modlul care permite imprimarea pe canvas, sintetic si suport metalizat de la 75 la 450 de micron. Acest echipament are niste upgradeuri care ofera posibilitatea de imprimare cu cerneala alba pe suprafete transparente sau hartii in culori inchise.

Aceasta masina ofera o rezolutie de 1600 dpi: High Definition Laser Array (HDLA) este noul cap de imprimare care dubleaza rezolutia printului pana la 1600 dpi (disponibila in 2017).


 


HP Indigo WS6800p

HP Indigo WS6800p

HP Indigo WS6800p este cea mai noua imprimanta din seria 3 (34 cm ). Este dedicata aplicatiilor de tip foto-carte. 317 x 980 mm suprafata de imprimare deschide oportunitatea pentru printurile in format special, calendare si carti in format atipic.


HP Indigo 50000
HP Indigo 50000

HP Indigo 50000 este ulima versiunea serie 4 (format coala B2), cu motoare in tandem si un cadru pentru dimensiuni mari pentru a permite printul in format B1 (746 x 1120 mm sau 10 pagini A4) imprimare fata/verso. Aceasta dezvoltare facuta de catre cei de la HP  pentru HP Indigo 20000 care permte si printuri pentru aplicatii de packaging.

 

Labels & Packaging

HP Indigo 8000
HP Indigo 8000


The HP Indigo 8000 is the latest narrow-web press designed for labels and packaging printing. This is a very productive labels press with a speed of up to 80 meters/minute in full colour and the Enhanced Productivity Mode that allows to use 3-colour printing to increase throughput in a significant way. The HP Indigo ElectroInk Premium White is an opaque white ink delivering up to silk screen opacity in single print process.


 

HP


High-Speed Inkjet market

HP is also a major player in the high-speed web fed inkjet printing market with the newly renamed “PageWide” presses which have a width up to 106,7 cm wide; the new high-speed inkjet press HP T1100S is focused on corrugated cardboard printing.
 

HP T1100S
HP 1100S

The HP PageWide Web presses benefit from the HP High Definition Nozzle Architecture (HDNA) that uses 2400 nozzles per inch native resolution and dual drop weight to deliver image details.

For all HP Indigo and HP PageWide Web presses: HP PrintOS
PrintOS is a print production operating system with a set of web and mobile apps to automate production; it is an open and secure cloud-based platform that is available anytime, anywhere.



 

Kodak

Kodak Nexpress ZX3900
Kodak Nexpress ZX3900

The Nexpress ZX3900 is the latest version of the dry toner SRA3+ Nexpress range capable of printing spot colours and varnishes. This version supports thicker papers (up to 610 microns) and synthetic substrates ideal for packaging applications. It can also print a new opaque white toner and uses a multi-bit LED writing system that can lead to higher resolution and better colour matching.



Kodak Prosper 6000C

Kodak Prosper 6000C

The Kodak ULTRASTREAM Inkjet Technology enables high resolution printing at a quality of 600 x 1800 dpi and speeds of up to 150 meters per minute on a wide variety of paper and plastic substrates. Commercial printing and packaging are the key market segments targeted by this press.

The ULTRASTREAM Technology will co-exist in the market along with KODAK STREAM Technology to offer different platform options, addressing the needs of each application.


 

Xeikon
 

Xeikon C3
Xeikon C3

As one of the fastest digital label presses on the market with printing speeds of 30 meters/minute, the Xeikon CX3 is 56% faster than any other press in the current Xeikon portfolio, making it the most productive digital press in its class.


 

Xeikon Trillum One

Xeikon Trillium One (liquid toner)

The Trillium One is a liquid toner web-fed press with reels up to 500 mm wide running at up to 60 meters/minute. This press uses separate units for each one of the colours. The targeted applications are books, magazines, transactional and direct mail.


 

Konica Minolta MGI


Konica Minolta PressC1100

Konica Minolta bizhub PRESS C1100 

Konica Minolta MGI Jet Varnish Konica Minolta MGI Foil
MGI Jet Varnish MGI iFOIL


The Konica Minolta bizhub PRESS C1100 was launched prior to DRUPA but what is new is the integration of MGI equipment (the MGI Jet Varnish and iFOIL) as part of the KM dry toner press finishing. Konica Minolta now owns 40% of MGI and the integration of their product offering was highlighted at DRUPA.


 

Konica Minolta Accurio Jet KM-1
Konica Minolta Accurio Jet KM-1

The Konica Minolta AccurioJet KM-1 B2+ inkjet press (585 x 750 mm) is now commercially available having been first shown at DRUPA 2012. Unlike most of the other sheet-fed inkjet machines, the KM1 is a UV inkjet system with a UV curable ink that is able to print on a wide range of standard uncoated papers (up to 0,6 mm) and synthetics. It can print 3000 B2+ sheets per hour (simplex) with 1200 dpi.

 

Konica Minolta bizhub PRESS C71cf
Konica Minolta bizhub PRESS C71cf

Presented at Label Expo in 2015, the KM bizhub PRESS C71cf is dedicated to the small to medium volume label printing market; it can print on glossy or mat papers as well as on polypropylene films. Its max width is 330 mm and it can print 13,5 m/min.


 

Oki
 

Oki Pro 9000 Series

OKI Pro 9000 Series

At the high end of its portfolio, OKI has a low cost printer that is able to print white and spot varnish toner. The new improved Pro 9000 series can print white and gloss in the SRA3 format and can print the white toner under the colours in one pass with better registration.


 

Ricoh

 

Ricoh Pro VC60000

Ricoh Pro VC60000

The Ricoh Pro VC60000 is a high-speed web to sheet water based inkjet press that can print at 150 meters/minute. The machine is equipped with a flood coated primer and a post print fixer to allow it to print on standard coated and uncoated papers (from 40 to 250 g/m2). The main applications are books, manuals, brochures, personalized marketing collaterals and direct marketing. It can print up to 120 000 A4 images per hour. Depending on the resolution that is targeted, the Ricoh press can print from 50 m/min at 1200 x 1200 dpi up to 150 m/min at 600 x 600 dpi.

 

Ricoh Pro C7100 & C9100

Ricoh Pro C7100 & C9100

Ricoh was also showing the latest dry toner presses; the Ricoh Pro C7100 can print white and gloss toner. The Ricoh Pro C9100 can print on paper up to 400 g/m2.


 

Canon Océ

Canon Dream Labo 5000

Canon DreamLabo 5000

This unique inkjet press is fully dedicated to the photo book market; its main features are: 7 dye-based inks and one-pass printing thanks to the seven full-width fixed print heads (Canon FINE print head technology). It can print 40 prints per minute (10 x 15 cm photos). DreamLabo 5000 offers automatic double-sided printing with speeds of up to 1000 A4 double-sided pages per hour. The optional Digital Photo Image Enhancement System automatically deals with imperfections such as red eye and colour cast.

Océ VarioPrint i300
Océ VarioPrint i300

The Océ VarioPrint i300 is an high-speed inkjet B3 (353 x 500 mm) press; it can print at 300 A4 images/minute or 8700 A4/hour (duplex); its ColorGrip option is an inkjet primer that should allow to print standard offset papers. A patented quick drying system, plus reduced set-up and finishing times and a short start-up period ensure maximum end-to-end productivity.



Océ ImageStream 2400
Océ ImageStream 2400


The Océ ImageStream 2400 is a high-speed inkjet web-fed press (width 520 mm); it can print 160 m/ minute, resulting in an equivalent of 2154 A4 pages per minute. The main applications are books, brochures, magazines and catalogues. Its new ink chemistry enables printing on a wider range of media including coated and uncoated papers and lightweight papers.




Océ ColorStream 6000 Chroma

Océ ColorStream 6000 Chroma

The Océ ColorStream series consists of four family members, ranging from 48 up to 127 meters/minute in full colour and optional 150 meters/minute in black and a print width of up to 540 mm and paper width up to 560 mm. It can be configured with up to 6 colours for monochrome, full colour and special inks to add extra value by using like MICR or security inks. The inks have a higher pigment content in order to give more vibrant colours without ink show through on lower weight papers.



Canon Voyager
Canon Voyager


The Canon Voyager is an aqueous inkjet B2+ press prototype; the technology is similar to the Landa one with the aqueous ink jetted onto an intermediate transfer belt and then this heated belt transfers the ink onto the paper. The only difference with the Landa system is that the Landa presses use a smaller pigment size in the ink which is reputed to give much higher ink density and better adhesion to substrates.


Canon imagePRESS C8000VP
Canon imagePRESS C8000VP

Equipped with the same technology as the imagePRESS C10000VP, the C8000VP can print 100 images/minute (colour and B&W). The range of applications is increased as it can print on media from 60 g/m2 (uncoated) and 70 g/m2 (coated) up to 350 g/m2 as well as on various specialities such as synthetics.


 

Xerox®

Xerox® IGen5®
Xerox® iGen® 5

On top of the 5th colour (Blue, Green or Orange) that extends the press gamut and makes it easier to match a wider variety of spot colours, the Xerox® iGen® 5 can also print matt dry toner. The option “thick stock” can print media up to 610 microns for the digital packaging market.



Xerox® Colour Press 800i/1000i
Xerox® Colour Press 800i/1000i

The update of the Xerox® Colour Press 800/1000 can now print gold and silver coloured inks as well as clear dry toner. A new server Xerox EX-P 1000i, developed by EFI is also available.



Xerox® Brenva HD
Xerox® BrenvaTM HD

The new Xerox® Brenva™ HD is built on the Xerox® iGen® chassis ; it is a B3+ sheet-fed press running at 194 ppm (A4 single-sided) and uses the enhanced Kyocera KJ4B print heads. It can print on inkjet treated papers and on standard uncoated papers depending on the applications. The press is equipped with an in-line spectro-photometer that provides automation for press calibration and the creation of stock profiles. It also has an object-oriented colour management system to recognize text, graphics and images and optimize the image quality.



Xerox® Trivor 2400
Xerox® TrivorTM 2400

The Xerox® Trivor™ 2400 press is based upon the Impika Compact press ans is equipped with enhanced Panasonic inkjet heads running at up to 168 m/minute depending on print quality. The High Density (HD) inks perform across a wide range of media including standard coated papers; inkjet optimized media are also recommended for this press.



VariJET 106

VariJET 106


VariJET 106 este un hibrid B1 Xerox® inkjet integrat cu KBA Rapida 106 (imprimanta offset) dedciata in principal pietei de pakaging. Imprima 4500 de coli B1 pe ora.





Heidelberg

 

Heidelberg Primefire 106

Heidelberg Primefire 106

Heidelberg Primefire 106 este noua imprimanta B1 dezvoltata in colaborare cu Fujifilm pe o platforma Speedmaster 106. Acest echipament poate imprima pe o grosime de pana la 600 de microni si 2000 de coli B1 pe ora si este specializata pentru aplicatiile de pliere cartoane. Utilizeaza capetele de imprimare Fujifilm Samba cu cerneluri cu pigment pe baza de apa si o unitate cu primer folosita si de Fujifilm JetSX. 

Pentru portofoliul echipamentelor cu toner uscat, Heidelberg’s Linoprint CP si imprimantele digitale CV au devenit Versafire CP si CV.



Landa


Landa si procesul de imprimare Nanography® 
Landa S10
Landa S10


NanoInk B1  (de la 4 la 7 culori – rezolutie 1200 dpi) este creat pentru producerea cutiilor pliabile, POS si cele din carton ondulat. Poate imprima pana la 13000 coli pe ora – orice substrat de la 60 la 800 de microni. Cu o limita de 30 000 de cutii, Landa S10 este pozitionata ca solutie digitala pentru mai multe de 50% din lucrarile de packaging.

Folosirea pigmentilor Landa NanoInk, spectrul de culori realizate prin procedeul 
Nanographic este mai mare decat orice alt procedeu si  acopera mai multe nuante de Pantone  decat imprimarea offset. Imprimanta este echipata si cu un spectometru pentru a detecta mai usor uniformitatea culorilor.


Landa S10P

Echipamentul NanoInk B1 (1050 mm si pana la 7 culori) este creat pentru tiparul comercial, mailing direct, reviste. Este pozitionata ca fiind o imprimanta cu cel mai mic Total Cost of Ownership.


 


Landa W10
Landa W10

Landa W10 cu un motor dublu si viteza mare (1050 mm) creat pentru piata de ambalaje flexibile.

Targetul Landa W10P este reprezentat de piata publicatiilor de calitate inalta (reviste, jurnale, cataloage si direct mail) cu o viteza de 100 metri/minut.




Landa L50

Landa L50

Modulul 
L50 Landa Nano-Metallography este creat pentru a  putea fi integrat mici de imprimare web a etichetelor. Permite solutii pentru toate etichetele metalizate.


 


Fujifilm

Fujifilm JetPress 720S
Fujifilm JetPress 720S


Fujifilm JetPress 720S este o imprimanta inkjet B2 care foloseste cerneluri bazate pe pigmenti aposi; este echipat cu un sistem de amorsare si  (Samba printheads developed by Fujifilm Dimatix); formatul maxim al colii  750x530 mm; o multitudine de hartii cretate si necretate pot fi imprimate dar colile trebuie sa fie plane si sa aiba stabilitate la apa. Poate imprima pana la 180 pagini/minut.




Screen

Screen Truepress JetSX
Screen Truepress JETSX


Truepress JetSX este un echipament inkjet B2 inkjet care utilizeaza cerneluri apoase pe baza de pigmenti; poate imprima hartii cretate de gramaj mare, necretate dar si hartii creative. Formatul colii este 500x700 mm si poate imprima pana la 108 pagini/minut.



 

paperman